Wrong Way Hiking Trail Stencil – 1.5 mm Galvanised Steel, Path Marking

Indicating a wrong direction on a trail is just as important as marking the right way — this is the pictogram that prevents route errors and keeps hikers safe. This 1.5 mm galvanised steel "wrong way" marking stencil is designed for local authorities, hiking associations and path maintenance professionals who want clean, precise and lasting marks — session after session.

Its galvanised steel rigidity is its main advantage: unlike plastic stencils that warp with use, this stencil lies perfectly flat against the surface, even on irregular substrates — tree bark, stone, wooden or metal posts. The result: clean marking with no bleed. It resists corrosion and can be used and cleaned hundreds of times. Used with spray paint (not included), it is easy to carry in the field thanks to its compact size.

Designed at La Fabriculture, made in Aveyron.

BENEFITS

✅ "Wrong way" pictogram — in line with GR® and PR trail signage standards ;

✅ 1.5 mm galvanised steel — rigid, corrosion-proof, very long service life ;

✅ Clean and precise marking — lies flat on irregular surfaces, zero bleed ;

✅ Reusable indefinitely — withstands repeated cleaning ;

✅ Versatile — trees, rocks, posts, wooden and metal furniture ;

✅ Used with spray paint — fast and clean in the field ;

✅ Light and portable — easy to carry during marking work ;

✅ Made in Aveyron — French design and manufacture.

HOW TO USE

• Clean and prepare the surface before application: brush off moss, scrape lichen, remove residue ;
• Press the stencil firmly against the surface, keeping the edges flat ;
• Apply spray paint (not included) in a light, even coat ;
• Allow a few seconds to dry before removing the stencil ;
• Clean the stencil after use with a cloth or suitable solvent to keep it in good condition ;
• For longer-lasting outdoor marking, use a glycerophtalic paint suitable for natural surfaces ;
• Use alongside the main trail marking stencil for a complete marking kit.

MAINTENANCE

• Remove paint residue immediately after each use with a suitable solvent ;
• Rinse with water and dry before storing ;
• Store flat to avoid any deformation ;
• Galvanised steel does not rust — the stencil can be stored outdoors or in a damp environment.

FAQ

What is the difference between the "wrong way" stencil and the main trail marking stencil?

The main trail marking stencil reproduces the continuity pictogram — it tells the hiker they are on the right path. The "wrong way" stencil reproduces the prohibition pictogram — it indicates a route that must not be taken. Both are complementary and necessary for a complete marking system in line with the FFR charter.

Why choose a galvanised steel stencil over a plastic one?

A plastic stencil warps with use, particularly under spray pressure or with certain solvents. 1.5 mm galvanised steel stays perfectly rigid and flat regardless of how often it is used. It resists solvents, repeated cleaning and difficult outdoor conditions. Over a long and intensive period of use, it is a far more cost-effective investment.

Does this stencil comply with French Hiking Federation (FFR) marking standards?

The stencil is designed to match the marking pictograms used on GR® and PR trails. For any official marking project, refer to the FFR technical and graphic charter, which specifies the required dimensions, colours and pictograms by trail type.

Is this stencil available made to measure or in other pictograms?

La Fabriculture makes custom pieces in its workshop in Aveyron. For a stencil in a specific size, a different pictogram or a large quantity for a local authority, contact us directly on +33 5 65 71 95 21.